manualshive.com logo in svg

HP PAVILION 15-BC018TX, Maintenance And Service Manual

Share
Download
HP PAVILION 15-BC018TX Maintenance And Service Manual Download Page 66

RTC battery

Table 5-13

  RTC battery description and part number

Description

Spare part number

RTC battery

741976-001

Before removing the RTC battery, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 36

).

2.

Remove the base enclosure (see 

Base enclosure on page 36

)

3.

Disconnect the cable from the battery (see 

Battery on page 38

), and then remove the following 

components:

a.

Solid-state drive (see 

Solid-state drive (M.2) on page 43

).

b.

Fans (see 

Fan assembly on page 54

).

c.

System board (see 

System board on page 55

).

Remove the RTC battery:

1.

Position the removed system board upside down.

2.

Use a non-conductive tool to pry the battery from the socket (1), and then remove the battery from the 
system board socket (2).

Reverse this procedure to install the RTC battery.

58

Chapter 5   Removal and replacement procedures for authorized service provider parts

Summary of Contents for PAVILION 15-BC018TX



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands