background image

EL-MF877-00   

Page  1 

Template Revision C 

Last revalidation date 09-May-2018 

HPI instructions for this template are available a

EL-MF877-01

 

Product End-of-Life Disassembly Instructions 

Product Category: External Options

 

Marketing Name / Model 
[List multiple models if applicable.] 

HP P204v 19.5-inch Monitor

 

Purpose: 

The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the 

disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 
2012/19/EC, Waste Electrical and Electronic Equipment (WEEE). 

NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the 
plastic part. For any questions on plastic marking, please contact 

HP’s Sustainability Contact

.    

1.0

 

Items Requiring Selective Treatment

 

1.1 Items listed below are classified as requiring selective treatment. 
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. 

Item Description 

Notes 

Quantity of 
items 
included in 
product

 

Printed Circuit Boards (PCB) or Printed Circuit 
Assemblies (PCA) 

With a surface greater than 10 sq cm 

IF board*1,KP board*1,Power board*1

 

Batteries, excluding Li-Ion batteries. 

All types including standard alkaline, coin or button style 
batteries   

Li-Ion batteries.  Include all Li-Ion batteries if more than 
one is provided with the product (such as a detachable 
notebook keyboard battery, RTC coin cell, etc.) 

Battery(ies) are attached to the product by (

check all 

that apply with an

 

“x” 

inside the

 

“[ ]”):

 

] screws 

] snaps 

] adhesive 

] other.  Explain 

NOTE: Add detailed removal procedures including 
required tools in the sections 3.1 and 3.2. 

Mercury-containing components 

For example, mercury in lamps, display backlights, 
scanner lamps, switches, batteries     

Liquid Crystal Displays (LCD) with a surface greater than 
100 sq cm 

Includes background illuminated displays with gas 
discharge lamps  

panel*1

 

Cathode Ray Tubes (CRT) 

Capacitors / condensers (Containing PCB/PCT) 

Electrolytic Capacitors / Condensers measuring greater 
than 2.5 cm in diameter or height 

External electrical cables and cords 

VGA cable*1, HDMI*1,Power cord*1 

Gas Discharge Lamps 

Plastics containing Brominated Flame Retardants 
weighing > 25 grams (not including PCBs or PCAs 
already listed as a separate item above)  

Summary of Contents for P204v








Reviews: