Display assembly
Description
Spare part number
Antenna, dual
931674-001
Back cover
For use only on products equipped with HD camera (includes dual antenna)
931554-001
For use only on products equipped with IR camera (includes dual antenna
938011-001
Camera
●
IR camera
919579-006
●
HD camera
919573-008
Display bezel
●
For products with IR camera
931559-001
●
For products with HD camera
931558-001
Display cable
●
For products with non-touch FHD screen with HD camera, 60 Hz
931565-001
●
For products with non-touch FHD screen with HD camera, 120 or 144 Hz
931566-001
●
For products with non-touch FHD screen with IR camera, 60 Hz
931567-001
●
For products with non-touch FHD screen with IR camera, 120 or 144 Hz
931568-001
●
For products with non-touch UHD screen and HD camera
931569-001
●
For products with non-touch UHD screen and IR camera
931570-001
Hinge kit (includes left and right hinges)
931587-001
Left display bracket
931585-001
Right display bracket
931586-001
Raw panel 43.94 cm (17.3”) (non-touch screen)
●
FHD, AG, UWVA, 300 eDP, 60 Hz Flat APJ ML
936915-001
●
FHD, AG, UWVA, 300 eDP, 120 Hz, DPNVSR Flat GML
922934-001
●
FHD, AG, UWVA, 300 eDP, 144 Hz, DPNVSR Flat GML
L11397-001
●
UHD, AG, UWVA, 300 eDP, 60 Hz, Flat PSR. ML
845823-004
●
FHD, AG, UWVA, 300 eDP, 60 Hz, 1.3PSR, Flat F, sync ML
939308-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the display assembly, follow these steps:
1.
Shut down the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
64
Chapter 6 Removal and replacement procedures for authorized service provider parts