Optical drive
Description
Spare part number
Optical drive
●
DVD+/-RW Double-Layer SuperMulti
756564-038
Optical drive bracket (left side)
931583-001
Optical drive bracket (right side)
931584-001
Optical drive bezel
931557-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the optical drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices connected to the computer.
4.
Remove the battery (see
).
Remove the optical drive:
▲
Disconnect the optical drive cable from the computer (1). Remove the Phillips M2.0 × 2.5 screw (2)
securing the optical drive in the computer, and then lift drive (3) away from the computer.
Reverse this procedure to install the optical drive.
48
Chapter 6 Removal and replacement procedures for authorized service provider parts