Component
Description
WARNING!
To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset.
For additional safety information, refer to the Regulatory,
Safety, and Environmental Notices.
To access this guide:
▲
Select the Start button, select HP Help and Support, and
then select HP Documentation.
NOTE:
When a device is connected to the jack, the computer
speakers are disabled.
(8)
Audio-in (microphone) jack
Connects an optional computer headset microphone, stereo
array microphone, or monaural microphone.
NOTE:
The audio-in (microphone) jack does not support
optional combo devices, such as a headset.
NOTE:
When devices are connected to the audio-out
(headphone)/Audio-in (microphone) combo jack and the audio-
in (microphone) jack at the same time, the audio-in jack has
higher priority.
(9)
Memory card reader
Reads optional memory cards that enable you to store,
manage, share, or access information.
To insert a card:
1.
Hold the card label-side up, with connectors facing the
computer.
2.
Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
▲
Press in on the card, and then remove it from the
memory card reader.
NOTE:
Refer to the illustration that most closely matches your computer.
Component
Description
(1)
Security cable slot
Attaches an optional security cable to the computer.
NOTE:
The security cable is designed to act as a deterrent,
but it may not prevent the computer from being mishandled or
stolen.
(2)
Mini DisplayPort
Connects an optional digital display device, such as a high-
performance monitor or projector.
8
Chapter 2 External component identification