manualshive.com logo in svg

HP OMEN 15-ce100, Maintenance And Service Manual, Page: 58 / 108

Share
Download
HP OMEN 15-ce100 Maintenance And Service Manual Download Page 58

Power connector cable

Description

Spare part number

For use only on computer models equipped with the Nvidia N17P GPUs

926204-001

For use only on computer models equipped with the Nvidia N17E GPU

938137-001

IMPORTANT:

Make special note of each screw and screw lock size and location during removal 

and replacement

Before removing the power connector cable, follow these steps:

1.

Shut down the computer.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 36

), and then remove the following components:

a.

Hinge covers (see 

Hinge covers on page 45

).

b.

System support brackets (see 

System support brackets on page 46

).

Remove the power connector cable:

1.

Disconnect the power connector cable from the system board (1).

2.

Remove the power connector cable (2).

Reverse this procedure to install the power connector cable.

48

Chapter 6   Removal and replacement procedures for authorized service provider parts

Summary of Contents for OMEN 15-ce100













































































































Reviews:

No comments