HP OMEN 15-ce100 Maintenance And Service Manual Download

Page: 43 / 108

Solid state drive

Description

Spare part number

256 GB

847109-023

128 GB

912322-006

IMPORTANT:

Make special note of each screw and screw lock size and location during removal

and replacement

Before removing the solid state drive, follow these steps:

Shut down the computer.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 36

Remove the solid state drive:

Remove the Phillips screw (1).

Remove the solid state drive at an angle (2).

Reverse this procedure to install the solid state drive.

Component replacement procedures

Summary of Contents for OMEN 15-ce100













































































































Search results

Summary of Contents for OMEN 15-ce100

Reviews:

Related manuals for OMEN 15-ce100

Brands by name

Popular brands

HP OMEN 15-ce100, Maintenance And Service Manual

Search results

Summary of Contents for OMEN 15-ce100

Reviews:

Related manuals for OMEN 15-ce100

Brands by name

Popular brands