HP NonStop TMF Page 802 Programming Manual Download

Page: 802 / 844

Error and Warning Messages

HP NonStop TMF Management Programming Manual—540140-008

7-74

Dump/Restore Errors and Warnings

9101 File is marked broken.

An attempt was made to make an online dump of an audited database file that
was marked “broken.”

The ZEMS-TKN-EMPHASIS token is set to TRUE.

9102 File is corrupt.

An attempt was made to make an online dump of an audited database file that
was found to be corrupted.

The ZEMS-TKN-EMPHASIS token is set to TRUE.

9103 Cannot read the disk volume label of

ZTMF-TKN-DR-VOLUMENAME

due to file-system error

ZTMF-TKN-DR-FILEERROR.

An online dump process encountered a file-system error while trying to read the
disk volume label.

The ZEMS-TKN-EMPHASIS token is set to TRUE.

9104 Volume

ZTMF-TKN-DR-VOLUMENAME

is not up for TMF (File-system

error 85).

An attempt was made to make an online dump of an audited file on a volume
that was not enabled for transaction processing.

The ZEMS-TKN-EMPHASIS token is set to TRUE.

9105 Unable to get TMF audit trail configuration information (Index =

ZTMF-TKN-DR-AUDITTRAILINDEX)

due to file-system error

ZTMF-

TKN-DR-FILEERROR.

A file-system error occurred while an online dump process was attempting to
obtain audit-trail configuration information.

The ZEMS-TKN-EMPHASIS token is set to TRUE.

9106 Unable to get TMF volume configuration information (Volume =

ZTMF-TKN-DR-VOLUMENAME)

due to file-system error

ZTMF-TKN-

DR-FILEERROR.

A file-system error occurred while an online dump process was attempting to
obtain volume configuration information.

The ZEMS-TKN-EMPHASIS token is set to TRUE.

Summary of Contents for NonStop TMF













































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NonStop TMF

Reviews:

Related manuals for NonStop TMF

Brands by name

Popular brands

HP NonStop TMF, Programming Manual

Search results

Summary of Contents for NonStop TMF

Reviews:

Related manuals for NonStop TMF

Brands by name

Popular brands