HP NonStop TMF Programming Manual Download Page 735

Page: 735 / 844

Error and Warning Messages

HP NonStop TMF Management Programming Manual—540140-008

7-7

Errors

ZTMF-ERR-INVALIDLABELMEDIA

The specified LABEL attribute is invalid or not present.

ZTMF-ERR-INVALIDUNLOADMEDIA

The specified UNLOAD attribute is invalid.

ZTMF-ERR-INVALIDMATSNFATSN

One (or both) audit-trail sequence number(s) is/are invalid.

ZTMF-ERR-NOMATSNFATSN

An audit-trail sequence number must be specified with this command.

ZTMF-ERR-FILENAMEWILD

A filename cannot be specified with the wildcard (*) syntax (within this context).

The ZTMF-TKN-FILENAME token supplied within the error list provides
additional information.

ZTMF-ERR-MEDIAREQUIRED

At least one tape volume must be specified with this command.

ZTMF-ERR-INVALIDDUMPINVALID

The specified INVALID attribute is invalid.

ZTMF-ERR-INVALIDMAXRESP

The specified MAXRESP value is invalid. The specified value must be greater
than or equal to -1.

ZTMF-ERR-INVALIDMEDIUMTYPE

The specified MEDIUM attribute is invalid. Either TAPE or DISK must be
specified.

ZTMF-ERR-INVALIDSYSTEMNAME

The specified SYSTEM name is invalid.

ZTMF-ERR-INVALIDOVERWRITELABEL

The value specified for the OVERWRITELABEL attribute is invalid. TRUE,
FALSE, or NULL must be specified.

Summary of Contents for NonStop TMF













































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NonStop TMF

Reviews:

HP NonStop TMF, Programming Manual, Page: 735 / 844

Search results

Summary of Contents for NonStop TMF

Reviews: