manualshive.com logo in svg

HP Neoware c50 - Thin Client, User Manual, Page: 43 / 228

Share
Download
HP Neoware c50 - Thin Client User Manual Download Page 43

Getting Started

Setting the Date & Time

27

Set the 

Time Zone

 according to the region in which you are using the 

thin client.

The thin client is set to automatically adjust the clock for daylight 
saving by default. You can disable this feature by unchecking the 
check box.

The options on the 

Time Synchronization Settings

 tab enable you to 

synchronize the time settings of your thin client with an NTP Time 
Server. Check the 

Enable Time Synchronization

 box and enter the 

timer server address in the field below.

The interval between synchronization events can be specified as 
number of hours from 

1

 to 

1193

 in the 

Choose Synchronization 

Interval

 field.

Clicking the 

Synchronize Time Now

 button will immediately update 

the thin client using the time settings from the specified Time 
Server.

Click 

Apply

 then 

OK

 to save the date and time settings.

Summary of Contents for Neoware c50 - Thin Client





































































































































































































































Reviews:

No comments