manualshive.com logo in svg

HP Neoware c50 - Thin Client, User Manual, Page: 201 / 228

Share
Download
HP Neoware c50 - Thin Client User Manual Download Page 201

System Information

System Inventory

185

System Inventory

If the 

System Properties

 dialog is password protected, users who do 

not have the password can still view information about the thin cli-
ent and its system by displaying the 

System Inventory

 dialog. This 

reproduces the same information that is found on the 

Software and 

Appliance Inventory

 and 

Network Inventory

 tabs of the 

System 

Properties

 dialog.

The 

System Inventory

 dialog is displayed by double-clicking the 

Inventory

 icon in the 

Control Panel

.

The Software and 
Appliance 
Inventory Tab

The 

Software and Appliance Inventory

 tab displays information 

about the operating system software installed in your thin client, and 
its internal hardware such as the CPU and installed memory. Refer 
to the section “The Software and Appliance Inventory Tab” on 
page 185 for details.

Summary of Contents for Neoware c50 - Thin Client





































































































































































































































Reviews:

No comments