HP mt43 Maintenance And Service Manual Download Page 57

Page: 57 / 105

Touchpad board

Description

Spare part number

Touchpad board

821171-001

Before removing the touchpad board, follow these steps:

Shut down the computer.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.

Remove the bottom cover (see

Bottom cover on page 25

Remove the battery (see

Battery on page 30

Remove the keyboard (see

Keyboard on page 39

Remove the internal base plate (see

Internal base plate on page 42

Remove the touchpad board:

Disconnect the cable from the touchpad to the smart card reader board (1).

Lift the tape (2), and then remove the 2 Phillips M2.5x2.5 screws (3) that secure the touchpad button
board to the computer.

Lift the top of the touchpad board up, and then pull it forward to remove it from the computer (4).

Reverse this procedure to install the touchpad board.

Component replacement procedures

Summary of Contents for mt43










































































































Search results

Summary of Contents for mt43

Reviews:

Related manuals for mt43

Brands by name

Popular brands

HP mt43, Maintenance And Service Manual

Search results

Summary of Contents for mt43

Reviews:

Related manuals for mt43

Brands by name

Popular brands