HP MSR SERIES, Configuration Manual, Page: 783 / 889

766
Figure 793 Configuring an access number
15. Type 30000 for Number ID .
16. Type 300 for Number .
17. Select play-welcome from the Bind to Menu list.
18. Click Apply .
Verifying the configuration
1. Dial the number 300 at Telephone A.
The call node plays audio file welcome.wav .
2. Dial 50# at Telephone A,
Telephone B1 rings.
Configure a secondary call on a call node (match the number
length)
Network requirements
As shown in Figure 794 , configure an IVR access number and call node functions on Router B to meet the
following requirements.
•
After the subscriber dials 300 (the IVR access number) from Telephone A, Router B plays the audio
file welcome.wav . Configure the number match length as 3, that is, when the subscriber dials 500
that matches number length 3, Telephone B2 rings.
•
If the subscriber dials a wrong number at Telephone A, Router B plays the audio file
input_error.wav .
• If no number is dialed at Telephone A within the timeout time, Router B plays the audio file
timeout.wav .