HP MSR SERIES, Configuration Manual, Page: 591 / 889

574
Figure 595 Configuring hunt group
b. Select Enable for Hunt Group .
c. Click Apply .
Perform the same configuration for the local number 1000 of Telephone A2. The configuration
procedure is not included here.
Verifying the configuration
Dial number 1000 from Telephone B (2000). Because Telephone A1 has a higher priority, Telephone B
is connected to Telephone A1. If you dial number 1000 from Telephone C (3000) when Telephone A1
and Telephone B are in a conversation, hunt group enables Telephone C to have a conversation with
Telephone A2.
Configuring three-party conference
Network requirements
As shown in Figure 596 , place a call from Telephone A to Telephone B and after the call is established,
hold the call on Telephone B. Then, place a call from Telephone B to Telephone C. After success, press
the hook flash on Telephone B and press 3. Then a three-party conference can be established among
Telephones A, B, and C.