HP MSR SERIES, Configuration Manual

Page: 155 / 889

138
Managing the PIN
Click PIN in Figure 136 . Then you can manage the PIN.
• PIN protection is disabled.
To enable PIN protection, enter a PIN, a string of four to eight digits, and click
Apply in the Enable
PIN Code Protection area.
Figure 137 Managing the PIN (PIN protection disabled)
• PIN protection is enabled and the PIN is authenticated.
To disable PIN protection, enter the PIN and click Apply in the Disable PIN Code Protection
area.
To modify the PIN, perform the following in the PIN Code Modification area:
i
Enter the current PIN in the Current PIN Code field.
ii
Enter the new PIN in the New PIN Code field.
iii
Confirm the new PIN in the Confirm New PIN Code field.
iv
Click Apply .
Figure 138 Managing the PIN (PIN protection enabled)
Rebooting the 3G modem
1. Click the icon for the target cellular interface.
2. In the dialog box that appears, click Yes .