HP MSM415, Hardware Installation, Page: 41 / 52

B
Regulatory information for MSM415 RF Security Sensor
Information in this appendix applies to the MSM415 RF Security Sensor (J9522A).
Notice for U.S.A.
Manufacturer's FCC Declaration of Conformity Statement
Manufacturer: Hewlett-Packard Company
3000 Hanover Street
Palo Alto, CA 94304-1185 USA
Phone: 650-857-1501
For questions regarding this declaration, contact the Product Regulations Manager at the
above address or phone number.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
„ Reorient or relocate the device.
„ Increase the separation between the equipment and the receiver.
„ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
„ Consult the dealer or an experienced radio/television technician for help.
The FCC requires the user to be notified that any changes or modifications made to the
device that are not expressly approved by the Hewlett-Packard Company may void the user's
authority to operate the equipment.