HP MSM415, Hardware Installation, Page: 33 / 52

A
Safety and Regulatory Information for RF Manager
Controller
Information in this appendix applies to the RF Manager IDS/IPS Controller (J9521A).
Safety Information
!
Documentation reference symbol. If the product is marked with this
symbol, refer to the product documentation to get more information
about the product.
WARNING A WARNING in the manual denotes a hazard that can cause injury
or death.
CAUTION A CAUTION in the manual denotes a hazard that can damage
equipment.
Do not proceed beyond a WARNING or CAUTION notice until you
have understood the hazardous conditions and have taken appro­
priate steps.
Grounding
These are safety class I products and have protective earthing terminals. There must be an
uninterruptible safety earth ground from the main power source to the product's input wiring
terminals, power cord, or supplied power cord set. Whenever it is likely that the protection has been
impaired, disconnect the power cord until the ground has been restored.
For LAN cable grounding:
■ If your LAN covers an area served by more than one power distribution system, be sure
their safety grounds are securely interconnected.
■
LAN cables may occasionally be subject to hazardous transient voltages (such as lightning
or disturbances in the electrical utilities power grid). Handle exposed metal components
of the network with caution.
Servicing
There are no user-serviceable parts inside this product. Any servicing, adjustment, maintenance, or
repair must be performed only by service-trained personnel.
This product does not have a power switch; it is powered on when the power cord is plugged in.