manualshive.com logo in svg

HP MSM415, Hardware Installation, Page: 22 / 52

Share
Download
HP MSM415 Hardware Installation Download Page 22

Getting Started 

Quick Setup 

Quick Setup 

1. 

Power up the RF Manager by connecting it to a power source. 

2. 

Connect Port 1 of the RF Manager to the Network using a network interface cable. 

Warning  

The default IP address of the RF Manager Controller is 192.168.1.246. Ensure that no other 

device on your network uses the same IP address as the controller. Connect port 1 on the 

controller to the desired subnet using the network interface cable provided. Do not connect 

the High Availability (HA) Interface port to the subnet. 

3. 

Access the HP ProCurve RF Manager Server. 

a.  Connect your computer to the same subnet where the Server is connected. 

b.  Change your computer IP address to 192.168.1.XXX. For example, 192.168.1.244. 

c.  Access the HP ProCurve RF Manager Server using SSH as shown in the figure below. 

d.  Login using the Username: config and Password: config. 

4. 

Complete the Server Initialization and Setup Wizard. Follow the steps in the Server 

Initialization and Setup Wizard to configure the HP ProCurve RF Manager Server. 

2-2 

Summary of Contents for MSM415





















































Reviews:

No comments