HP MSM415, Hardware Installation, Page: 21 / 52

2
Getting Started
Introduction
These procedures describe how to initially set up the RF Manager and MSM415 Sensor. After
preforming the procedures outlined here, see the HP ProCurve RF Manager and Sensors
Management and Configuration Guide .
License Key File
Note
The HP ProCurve RF Manager Controller is activated by a license key. You obtain the license
key by registering the product on the MyProcurve portal. To register the product, follow
these instructions:
1. The RF Manager
ships with an HP ProCurve RF Manager Controller 50 Sensor License
Activation Registration Card
in the box. The License Registration ID is printed on this card.
With the License Activation Registration Card in hand, go to the My ProCurve portal:
https://my.procurve.com .
2. If you are a new user, click, Customer account or Partner account under Create an
account and follow the prompts to set up an account.
3. Log into the My ProCurve portal using your My ProCurve user ID and password.
4. Under My Licenses , select Device Software License .
5. Enter the License Registration ID from the registration card, and the product MAC
address (printed on the product or listed as Serial Number at the bottom of the initial RF
Manager product activation screen) and select Next . The Generate license key for
ProCurve device page displays. Select Next .
6. Review and accept the License Agreement text.
7. Complete the service information fields.
The product license key is generated, a link to it is displayed, and a copy is sent to you by
email.
8. Follow the on-screen prompts to download the license key file and save it to your local
system.