HP msm3 series, Installation And Getting Started Manual

Page: 111 / 132

Regulatory information
A-3
FCC Class A statement
(Applies to: MSM410)
This is an FCC Class A device. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense.
Warning
Exposure to Radio Frequency Radiation
The radiated output power of this device is below the FCC radio exposure limits.
Nevertheless, the device should be used in such a manner that the potential for human
contact during normal operation is minimized. To avoid the possibility of exceeding the FCC
radio frequency exposure limits, human proximity to the antennas should not be less than 20
cm (8 inches) during normal operation.
Notice for Canada
For MSM310, MSM310-R, MSM320, MSM325, MSM320-R, MSM335, MSM422,
E-MSM430, E-MSM460, and E-MSM466:
 This device complies with the limits for a Class B digital device and conforms to Industry
Canada standard ICES-003. Products that contain a radio transmitter comply with
Industry Canada standard RSS210 and are labeled with an IC approval number.
 Cet appareil numérique de la classe B est conforme à la norme ICES-003 de Industry
Canada. La radio sans fil de ce dispsitif est conforme à la certification RSS 210 de
Industry Canada et est étiquetée avec un numéro d'approbation IC.
 This device complies with the Class B limits of Industry Canada. Operation is subject to
the following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept interference received, including interference that may cause
undesired operation.
For MSM410:
 This is an FCC Class A device. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
 This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique
de la Classe A est conforme à la norme NMB-003 du Canada.
To reduce potential radio interference with other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication.