
Systems Insight Manager integration 76
Example:
ADDITIONALWSDISC.PROPS file with iPDU entry
# ----------------------------------------------------
# Additional Web Server Discovery Properties
#
# ----------------------------------------------------
# NOTE: See "additionalWsDisc_README.txt" for a description of entries in
# this file and how to add or remove additional web server ports used for
# discovery and identification.
# ----------------------------------------------------
#
# ----------------------------------------------------
# The following are actual web server ports enabled by default.
# To remove them from the discovery process, comment out the line with a
'#'
# or remove it. You will need to restart the HP SIM service for
# the changes to take effect. In addition you will need to run the Device
# Identification task to find any new ports that were defined.
# ----------------------------------------------------
411=Director Agent, ,true,false, ,http
3201=Compaq TaskSmart, ,true,false, ,https
8008=Default Home Page, ,true,false, ,http
1311=Server Administrator, ,true,false, ,https
1234=HP iPDU, ,true,false, ,https
The last entry allows HP SIM to detect the iPDU running on port 1234 and using HTTPS (Secure Socket
Layer protocol).
HP SIM services must be restarted to apply the change.
Configuring HP SIM to receive traps
Before HP SIM can receive traps, the correct MIB file (cpqpower.mib) must be compiled into HP SIM. To
download the HP Power MIB, visit the HP website To register the MIB:
1.
Copy the MIB to the HP\Systems Insight Manager\mibs folder.
2.
From the HP\Systems Insight Manager\mibs folder, run
mcompile cpqpower.mib
from the
command line to compile the new MIB. A new file named cpqpower.cfg is created.
3.
Register the new MIB by entering
mxmib -a cpqpower.cfg
from the HP\Systems Insight
Manager\mibs command line.
4.
Enter
HP\Systems Insight Manager\mibs>mxmib
at the command line and verify that the
new MIB is listed.