Table 21 SAS disk drive LEDs
(continued)
Indication
Drive status LED status
Drive activity LED status
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.
Regularly flashing amber
(1 Hz)
Off
The drive is offline, a spare, or not configured as part of an
array.
Off
Off
Optical drive
The server has one SATA DVD+RW drive. This device has one activity LED.
Rear panel LEDs
Figure 25 Rear panel LEDs and buttons
5
3
iLO 3 physical presence
pinhole button
1
Power supply LED
NIC/iLO 3 link LED
2
UID LED/button
4
NIC/iLO 3 activity LED
Table 22 Rear panel LEDs and buttons
Status
Name
Power supply LED
•
Green = Normal
•
Off = System is off or power supply has failed
UID LED/button
•
Blue = Identification
•
Flashing blue = Remote iLO session or a firmware flash update is in progress
•
Off = Off
NIC/iLO 3 activity LED
•
Green = Network activity
•
Flashing green = Network activity
•
Off = No network activity
NIC/iLO 3 link LED
•
Green = Network link
•
Off = No network link
The iLO 3 physical presence button enables you to reset iLO 3 and gain access to the system
if all iLO passwords are lost. A momentary press causes a soft reset of iLO 3 when the button
iLO 3 physical presence
pinhole button
HP Confidential
70
Troubleshooting
