HP Integrity NonStop X NS7 Planning Manual Download Page 6

Page: 6 / 97

About This Document

This guide provides an overview of HPE Integrity NonStop X NS7 systems, specifications for
planning system installation, and is intended for personnel who have completed Hewlett Packard
Enterprise training on NonStop X system support.

Supported Release Version Updates (RVUs)

This publication supports L15.08 and all subsequent L-series RVUs until otherwise indicated in
a replacement publication.

New and Changed Information in 799257–004

This version introduces the new:

•

HPE Integrity NonStop X NS7 X2 system

•

HPE Integrity NonStop X NS7 Carrier-Grade (CG) X2 system

•

HPE NonStop X (V2) Gen 9 CLIM

•

HPE NonStop X FDR IB NonStop Application Direct Interface (NSADI) switch

New and Changed Information in 799257–003R

Updated Hewlett Packard Enterprise references.

Publishing History

Publication Date

Product Version

Part Number

June 2016

N.A.

799257-004

November 2015

N.A.

799257-003R

August 2015

N.A.

799257-003

March 2015

N.A.

799257-002

February 2015

N.A.

799257-001

Summary of Contents for Integrity NonStop X NS7


































































































Search results

Summary of Contents for Integrity NonStop X NS7

Reviews:

HP Integrity NonStop X NS7, Planning Manual, Page: 6 / 97

Search results

Summary of Contents for Integrity NonStop X NS7

Reviews: