HP Indigo press ws4000 Cluster 1 procedures
proprietary and confidential
CA293-00600, Rev 00
page 117 of 221
Figure 125 Marking knobs
•4. Mark each of the knobs using “White-out”, or equivalent white paint, to
mark their rotational position (Figure 125).
•5. For each of the knobs, write down the number of clockwise turns required
to fully tighten each knob. Fill out the table below.
BID engage knob number
Number of turns clockwise
3
to tighten
1
2
3
4
5
6
7 (separate from 6 BID
terminal assembly)
Mark knobs
w
ith
“White-out” paint
