HP Indigo press ws4000 Cluster 1 procedures
proprietary and confidential
CA293-00600, Rev 00
page 99 of 221
Figure 99 Four screws that secure the motor to the wall
c. Remove the four screws that secure the motor to the motor plate on
the Output wall.
Note:
Leave the top screw for last, as this supports the motor while you are removing
the other screws.
One person should unscrew the motor screws, and another person should hold
the motor and lift it out of the press.
Figure 100 Loosen long belt on motor drive shaft
d. Cut and remove the long belt on the drive shaft.
e. Ensure that the interlock cable that goes to the junction box does not
get in the way when removing the motor from the press.
f.
Pull motor out of press sliding it off the two belts on the drive shaft.
Note:
A large flat head screwdriver may be helpful to pry the belts off the drive shaft.
