HP HPE VAN SDN Controller 2.7, Administrator'S Manual, Page: 53 / 231

Description Screen component
Date and time when the license
Licensed For
expires. Expire By
When a license is deactivated, an uninstall key is assigned for license transfer
purposes, see
“Transferring licenses” (page 93) .
Uninstall Key
Installing, activating, uninstalling, or transferring licenses
For information about installing, activating, uninstalling, and transferring licenses, see “License
Registration and Activation” (page 86) .
Team
The Team screen displays team and region configuration information including:
•
Team status (top banner)
•
Team configuration and controller status (top section)
•
Region configuration (middle section)
•
Device owners (bottom section)
For details on viewing information on the Team screen, see “Viewing your team configuration
using the UI” (page 104) . For details on configuring High Availability (HA) and teaming, see
“Configuring for High Availability” (page 99) .
Figure 17 Team screen
Support logs
About support logs
The support logs maintain an internal record of events of interest from the operations of an active
SDN controller. This information is the type of data a support engineer would request when
troubleshooting an SDN installation.
The log file is configured to have a maximum size of 10 MB and to keep 4 previous versions.
The
log.log
file is the primary log for controller information. With 4 full previous versions and
the one active log, the core controller logging will consume at most 50 MB of disk space. The
controller allows up to five support logs; one active and four in storage:
•
Support logs are stored in the controller
/var/log/sdn/virgo/logs
directory.
•
When the current log reaches 10 MB, the controller copies the log to storage and starts a
new log.
Team 53