![HP HPE ProLiant ML30 Gen9 Maintenance And Service Manual Download Page 93](http://html.mh-extra.com/html/hp/hpe-proliant-ml30-gen9/hpe-proliant-ml30-gen9_maintenance-and-service-manual_164428093.webp)
Specifications
Environmental specifications
Specification
Value
Temperature range*
Operating
10° C to 35° C (50° F to 95° F)
Nonoperating
-30° C to 60° C (-22° F to 140° F)
Relative humidity (noncondensing)
Operating, maximum wet bulb temperature of 28°C
(82.4°F)
10% to 90%
Nonoperating, maximum wet bulb temperature of
38.7°C (101.7°F)
5% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1.0° per 304.8 m (1.8°F per 1000 ft)
to 3048 m (10,000 ft) is applicable. No direct sunlight allowed.
Server specifications
Specification
Value
Height
36.83 cm (14.50 in)
Depth
47.50 cm (18.70 in)
Width
17.50 cm (6.89 in)
Weight (full load, approximate values)
—
Four-bay LFF non-hot-plug drive model
13.1 kg (28.82 lb)
Four-bay LFF hot-plug drive model
13.6 kg (29.92 lb)
Eight-bay SFF hot-plug drive model
12.4 kg (27.28 lb)
Power supply specifications
Depending on installed options, the server is configured with one of the following power supplies:
• HPE 350W non-hot-plug power supply (E-star 1.0)
• HPE 350W non-hot-plug power supply (E-star 2.0)
• HPE 460 W CS Gold hot-plug power supply (92% efficiency)
This power input module is only supported when the two-bay redundant power supply assembly option is
installed.
CAUTION:
Check the system and power supply input ratings before powering up the server.
For detailed power supply specifications, see th QuickSpecs on the
Hewlett Packard Enterprise website
Specifications
93