•
Module Type
—The TPM or TM type and specification version. The possible values are
TPM 1.2
,
TPM
2.0
,
TM 1.0
,
Not Specified
, and
Not Supported
. This value is displayed when a TPM or TM is
present on a server.
•
SD-Card Status
—The status of the internal SD card. If present, the number of blocks in the SD card
is displayed.
•
Access Panel Status
—The state of the access panel. The possible states are
OK
(the access panel
is installed) and
Intrusion
(the access panel is open). This value is displayed only on servers that are
configured for chassis intrusion detection.
•
iLO Date/Time
—The internal clock of the iLO subsystem.
Connection to HPE status
This section shows the remote support registration status for supported servers.
The possible status values follow:
•
Registered to Remote Support
—The server is registered.
•
Registration incomplete
—The server is registered for Insight Online direct connect remote support,
but step 2 of the registration process is incomplete.
•
Not registered
—The server is not registered.
•
Unable to retrieve the HPE Remote Support information
—The registration status could not be
determined.
•
Remote Support Registration Error
—A remote support connection error occurred.
Managing iLO sessions
Prerequisites
Administer User Accounts privilege
Procedure
1.
Navigate to the
Information
page, and then click the
Session List
tab.
The
Session List
page displays information about the active iLO sessions.
2.
Optional: To disconnect one or more sessions, click the check box next to each session you want to
disconnect, and then click
Disconnect Session
.
Session list details
iLO displays the following details in the
Current Session
and
Session List
tables:
•
User
—The iLO user account name.
•
IP
—The IP address of the computer used to log in to iLO.
•
Login Time
—The date and time that the iLO session started.
•
Access Time
—The date and time that iLO was last active in the session.
•
Expires
—The date and time that the session will end automatically.
38
Connection to HPE status
