The iLO 5 Configuration Utility is still open from the previous session.
b.
Press
ESC
several times to navigate to the
System Configuration
page.
c.
To exit the System Utilities and resume the normal boot process, click
Exit and resume system
boot
.
Managing local user accounts with the iLO 5 Configuration Utility
Adding user accounts (iLO 5 Configuration Utility)
Procedure
1.
Optional: If you access the server remotely, start an iLO remote console session.
2.
Restart or power on the server.
3.
Press
F9
in the server POST screen.
The UEFI System Utilities start.
4.
Click
System Configuration
, click
iLO 5 Configuration Utility
, click
User Management
, and then
click
Add User
.
5.
Select the privileges for the new user.
To assign a privilege, select
YES
in the menu next to the privilege name. To remove a privilege,
select
NO
.
The
Login
privilege is assigned to every user by default, so it is not listed in the iLO 5 Configuration
Utility.
You cannot assign the
Recovery Set
privilege through the iLO 5 Configuration Utility, so it is not
available in the list.
6.
Enter the user name and login name in the
New User Name
and
Login Name
boxes.
7.
Enter the password.
a.
Move the cursor to the
Password
box, and then press
Enter
.
The
Enter your new password
box opens.
b.
Type the password, and then press
Enter
.
The
Confirm your new password
box opens.
c.
Type the password again to confirm, and then press
Enter
.
The iLO 5 Configuration Utility confirms the new account creation.
8.
To close the confirmation dialog box, click
OK
.
9.
Create as many user accounts as needed, and then press
F12
to save the changes and exit the
system utilities.
10.
When prompted to confirm the changes, click
Yes - Save Changes
to exit the utility and resume the
boot process.
More information
iLO user privileges on page 204
iLO user account options on page 204
Managing local user accounts with the iLO 5 Configuration Utility
25
