manualshive.com logo in svg

HP HPE iLO 5, User Manual, Page: 132 / 411

Share
Download
HP HPE iLO 5 User Manual Download Page 132

Operating system considerations: Virtual Floppy/USB key

•

Boot process and DOS sessions

—During the boot process and DOS sessions, the virtual floppy

device appears as a standard BIOS floppy drive (drive A). If a physically attached floppy drive exists, it
is unavailable at this time. You cannot use a physical local floppy drive and a virtual floppy drive
simultaneously.

•

Windows Server 2008 or later

—Virtual Floppy/USB key drives appear automatically after Windows

recognizes the USB device. Use the virtual device as you would use a locally attached device.

To use a Virtual Floppy as a driver diskette during a Windows installation, disable the integrated
diskette drive in the host RBSU, which forces the virtual floppy disk to appear as drive A.

To use a virtual USB key as a driver diskette during a Windows installation, change the boot order of
the USB key drive. Hewlett Packard Enterprise recommends placing the USB key drive first in the boot
order.

•

Windows Vista

—Virtual Media does not work correctly on Windows Vista when you use Internet

Explorer 7 with Protected Mode enabled. If you attempt to use Virtual Media with Protected Mode
enabled, various error messages appear. To use Virtual Media, select 

Tools

 > 

Internet Options

 >

Security

, clear 

Enable Protected Mode

, and then click 

Apply

. After you disable Protected Mode,

close all open browser instances and restart the browser.

•

Red Hat Enterprise Linux and SuSE Linux Enterprise Server

—Linux supports the use of USB

diskette and key drives.

Changing diskettes

When you are using a Virtual Floppy/USB key on a client machine with a physical USB disk drive, disk-
change operations are not recognized. For example, if a directory listing is obtained from a floppy disk,
and then the disk is changed, a subsequent directory listing shows the directory listing for the first disk. If
disk changes are necessary when you are using a Virtual Floppy/USB key, make sure that the client
machine contains a non-USB disk drive.

Operating system considerations: Virtual CD/DVD-ROM

MS-DOS

The Virtual CD/DVD-ROM is not supported in MS-DOS.

Windows

The Virtual CD/DVD-ROM appears automatically after Windows recognizes the mounting of the
device. Use it as you would use a locally attached CD/DVD-ROM device.

Linux

The requirements for Red Hat Enterprise Linux and SuSE Linux Enterprise Server follow:

•

Red Hat Enterprise Linux

—On servers that have a locally attached CD/DVD-ROM, the Virtual

CD/DVD-ROM device is accessible at 

/dev/cdrom1

. However, on servers that do not have a

locally attached CD/DVD-ROM, such as BL c-Class blade systems, the Virtual CD/DVD-ROM is
the first CD/DVD-ROM accessible at 

/dev/cdrom

.

132

 Operating system considerations: Virtual Floppy/USB key

Summary of Contents for HPE iLO 5




























































































































































































































































































































































































































Reviews:

No comments