HP HPE G2 Series, User Manual, Page: 94 / 164

Local display
This section contains operation information for the Hewlett Packard Enterprise G2 Series Metered, Switched,
and Metered & Switched Power Distribution Units.
OLED display
The OLED display provides information about the PDU and connected devices. The OLED window flashes
red when a critical alarm is active. Information about the basic configuration of some settings is available
through the OLED. Information about the full configuration of all settings is available through the remote
interfaces. The OLED display orientation can be changed using an OLED setting. The display can be rotated
0° and 180°.
The PDU has a three-button, graphical OLED interface panel. Use the buttons to change the screen display,
retrieve specific performance data, or change configuration values. The display view can also change
automatically. For example, the display changes to show active alarms as they occur, or particular displays
update due to a change in operating state.
The OLED display has two modes.
• Screensaver mode —Cycles through a set sequence of screens that display current PDU values. Current
values are refreshed every 10 seconds. The user cannot select a custom sequence of screens. The
screensaver displays automatically after 30 seconds of inactivity from the start-up screen, a menu, or a
submenu. Values are refreshed every five seconds.
• Menu mode (OLED main menu) —The settings that display under each high-level (main) menu depend
on your PDU model.
Menu mode
Button When in menu mode When in screensaver mode
Menu Select from the four main menus. Returns to the previous display screen before
entering the screensaver mode.
Scroll
Scrolls down through the list of menu items.
NOTE: A highlighted menu item is ready to
be selected.
Returns to the previous display screen before
entering the screensaver mode.
Select Opens the selected menu. Returns to the previous display screen before
entering the screensaver mode.
LED unit status
The LED will change colors depending on the state of the PDU.
LED state Description
Solid green Normal operation
Solid red Critical alarm
Solid orange Warning Alarm
Blinking orange Disconnected from network
Table Continued
94 Local display