HP HPE FlexNetwork MSR Router Series, Configuration Manual, Page: 511 / 594

501
Configuring an L2VE interface
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an L2VE interface and
enter its view.
interface ve-l2vpn
interface-number
By default, no L2VE interface is
created on the device.
You can create a maximum of 8192
L2VE interfaces on a device.
3. (Optional.) Configure a
description for the interface.
description text
By default, the description of the
interface is
VE-L2VPN number
Interface , for example,
VE-L2VPN100 Interface .
4. (Optional.) Set the MTU for
the interface.
mtu size By default, the MTU is 1500 bytes.
5. (Optional.) Set the expected
bandwidth for the interface.
bandwidth bandwidth-value
By default, the expected bandwidth is
100000 kbps.
6. (Optional.) Restore the
default settings for the
interface.
default N/A
7. (Optional.) Bring up the
interface.
undo shutdown
By default, the interface is up.
Configuring an L3VE interface
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an L3VE interface
and enter its view.
interface ve-l3vpn
interface-number
By default, no L3VE interface is
created on the device.
You can create a maximum of 8192
L3VE interfaces on a device.
3. (Optional.) Configure a
description for the
interface.
description text
By default, the description of the
interface is
VE-L3VPN number
Interface , for example,
VE-L3VPN100 Interface .
4. (Optional.) Set the MTU for
the interface.
mtu size By default, the MTU is 1500 bytes.
5. (Optional.) Set the
expected bandwidth for the
interface.
bandwidth bandwidth-value
By default, the expected bandwidth is
100000 kbps.
6. (Optional.) Restore the
default settings for the
interface.
default N/A
7. (Optional.) Bring up the
interface.
undo shutdown By default, the interface is up.