338
Step Command
Remarks
4.
Create the IS-IS IPv6 unicast
address family and enter its
view.
address-family ipv6
[
unicast
]
By default, the IS-IS IPv6 unicast
address family is not created.
5.
Return to system view.
quit
N/A
6.
Enter interface view.
interface
interface-type
interface-number
N/A
7.
Enable IPv6 for the IS-IS
process on the interface.
isis ipv6 enable
[
process-id
]
By default, IPv6 is disabled for the
IS-IS process on the interface.
Configuring EBGP between a PE and a CE
1.
Configure the PE:
Step
Command Remarks
1.
Enter system view.
system-view
N/A
2.
Enable BGP and enter BGP
view.
bgp
as-number
N/A
3.
Enter BGP-VPN instance
view.
ip vpn-instance
vpn-instance-name
N/A
4.
Configure the CE as the VPN
EBGP peer.
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
as-number
as-number
By default, no BGP peer is
configured.
5.
Create the BGP-VPN IPv6
unicast address family and
enter its view.
address-family ipv6
[
unicast
]
By default, the BGP-VPN
IPv6 unicast address family
is not created.
Configuration commands in
BGP-VPN IPv6 unicast
address family view are the
same as those in BGP IPv6
unicast address family view.
For more information, see
Layer 3—IP Routing
Configuration Guide.
6.
Enable IPv6 unicast route
exchange with the specified
peer or peer group.
peer
{
group-name
|
ip-address
[
prefix-length
] }
enable
By default, BGP does not
exchange IPv6 unicast
routes with any peer.
7.
Redistribute the routes of the
local CE.
import-route
protocol
[ {
process-id
|
all-processes
}
[
allow-direct
|
med
med-value
|
route-policy
route-policy-name
]
* ]
A PE must redistribute the
routes of the local CE into its
VPN routing table so that it
can advertise them to the
peer PE.
8.
(Optional.) Configure filtering
of advertised routes.
filter-policy
{
acl6-number
|
prefix-list
ipv6-prefix-name
}
export
[
protocol process-id
]
By default, BGP does not
filter advertised routes.
9.
(Optional.) Configure filtering
of received routes.
filter-policy
{
acl6-number
|
prefix-list
ipv6-prefix-name
}
import
By default, the PE does not
filter received routes.
2.
Configure the CE:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
Summary of Contents for HPE FlexNetwork MSR Router Series
Page 10: ...viii Index 540 ...