287
To save all route updates from the specified peer or peer group (IPv6 unicast/multicast address
family):
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP IPv6 unicast
address family view,
BGP-VPN IPv6 unicast
address family view, or BGP
IPv6 multicast address family
view.
•
Enter BGP IPv6 unicast
address family view:
a. bgp
as-number
[
instance
instance-name
]
b. address-family ipv6
[
unicast
]
•
Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
[
instance
instance-name
]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[
unicast
]
•
Enter BGP IPv6 multicast
address family view:
f. bgp
as-number
[
instance
instance-name
]
g. address-family ipv6
multicast
N/A
3.
Save all route updates from
the peer or peer group.
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
keep-all-routes
By default, the routes are not
saved.
This command takes effect only
for the routes received after this
command is executed.
Configuring manual soft-reset
To configure manual soft-reset (IPv4 unicast/multicast address family):
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
Summary of Contents for HPE FlexNetwork 7500 series
Page 505: ...493 Connector N A ...
