247
Step
Command
Remarks
2.
Enter BGP IPv6 unicast
address family view,
BGP-VPN IPv6 unicast
address family view, or BGP
IPv6 multicast address family
view.
•
Enter BGP IPv6 unicast address
family view:
a. bgp
as-number
[
instance
instance-name
]
b. address-family ipv6
[
unicast
]
•
Enter BGP-VPN IPv6 unicast
address family view:
c. bgp
as-number
[
instance
instance-name
]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[
unicast
]
•
Enter BGP IPv6 multicast address
family view:
f. bgp
as-number
[
instance
instance-name
]
g. address-family ipv6
multicast
N/A
3.
Configure BGP route
reception filtering policies.
•
Reference ACL or IPv6 prefix list
to filter BGP routes received from
all peers:
filter-policy
{
ipv6-acl-number
|
prefix-list ipv6-prefix-name
}
import
•
Reference a routing policy to filter
BGP routes received from a peer
or peer group:
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
route-policy
route-policy-name
import
•
Reference an ACL to filter BGP
routes received from a peer or
peer group:
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
filter-policy
ipv6-acl-number import
•
Reference an AS path list to filter
BGP routes received from a peer
or peer group:
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
as-path-acl
as-path-acl-number
import
•
Reference an IPv6 prefix list to
filter BGP routes received from a
peer or peer group:
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
prefix-list
ipv6-prefix-name
import
Use at least one method.
By default, no route
reception filtering is
configured.
Setting the BGP route sending rate
If a device sends many new routes within a short time period, it might be unable to add the routes to
the FIB before the peer device adds them. This might result in traffic forwarding failure. To avoid this
problem, you can perform this task to set an appropriate route sending rate for the device.
Summary of Contents for HPE FlexNetwork 7500 series
Page 505: ...493 Connector N A ...
