Table 29 System software installation checklist
3PAR StoreServ Storage system
3PAR StoreServ Storage serial number
The 3PAR StoreServ Storage system serial number can be obtained from the
following:
•
Located at the rear of the system next to the power switch for the controller
node enclosure PCM
•
Located in the product documentation provided with your system
3PAR StoreServ Storage system name
IP address (IPv4 only)
Subnet mask
Gateway IP address
Date and time:
•
Copy from the SP
•
Enter manually
•
Use Network Time Protocol (NTP) server information
•
Time Zone
New password to assign
3paradm
(to access the system)
NOTE:
Passwords for the
3paradm
username can include all printable characters
and be between 6-8 characters in length.
HPE 3PAR SmartStart
Performing host configurations after using 3PAR SmartStart for installation setup
requires an available server to run Microsoft Windows Server 2008 R2, x64 Edition;
Windows Server 2012; or Windows 7.
System Software Installation Checklist
89
Summary of Contents for HPE 3PAR StoreServ 8000
Page 142: ...142 Warranty and regulatory information ...
Page 143: ...Regulatory Information 143 ...
