System Wizard Step 2—Enter Serial Number
1.
Verify that the serial number is populated. If not, enter the system serial number.
2.
Click
Next
to proceed to the next wizard step.
NOTE:
The 3PAR StoreServ Storage system serial number can be obtained from the following locations:
•
At the rear of the system next to the power switch for the controller node enclosure PCM
•
In the product documentation provided with your system
Figure 84 Serial number label locations
110
Service Processor and System Setup
Summary of Contents for HPE 3PAR StoreServ 8000
Page 142: ...142 Warranty and regulatory information ...
Page 143: ...Regulatory Information 143 ...
