******************************************************************************
**** End of SAUTIL Output ****
******************************************************************************
In this example, the physical disk (
1I:1:9
or
0x5000c5000030b0c5
) firmware is updated from
HPD3
to
HPD4
.
NOTE:
Repeat this procedure for each physical disk where you want to update the firmware.
Checking and updating SAS storage enclosure firmware online
To confirm and update the firmware version of SAS storage enclosure attached to the Smart Array
controller, use the
sautil
command.
To run the
sautil
command, you must log in as a superuser.
Before running the
sautil
command to confirm or update SAS storage enclosure firmware, you
must know the device file name for the Smart Array controller and the physical drive ID for the SAS
storage enclosure (SES device) attached to the Smart Array controller.
Determining the Smart Array controller device file
To determine the device file name for the Smart Array controller, use the
ioscan -kfnd ciss
command. For example:
# ioscan -kfnd ciss
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
ext_bus 3 0/6/0/0/0/0/1/0/0/0 ciss CLAIMED INTERFACE PCIe SAS SmartArray P800 RAID Controller
/dev/ciss3
In this example,
/dev/ciss3
is the device file for the Smart Array controller.
Determining the physical drive ID and firmware version for SAS storage enclosures
To determine the physical drive ID of the SAS storage enclosures (SES devices), use the
sautil
<device_file>
command (extensive output), or the
sautil <device_file> -s
command
(shortened output).
To display an abbreviated list of information for the Smart Array Controller and all connected
devices, enter
sautil <device_file> -s
.
The SAS/SATA DEVICE SUMMARY lists the physical drive ID for each disk device and SES device.
It can be represented as Connector:Enclosure:Bay, such as: 1E:1:0 or WWID, such as:
0x500000e010f16432. The command output also shows the firmware version installed on each
SES device. For example:
# sautil /dev/ciss3 –s
******************************************************************************
**** ****
**** S A U T I L S u p p o r t U t i l i t y ****
**** ****
**** for the HP SmartArray RAID Controller Family ****
**** ****
**** version A.02.13 ****
**** ****
**** (C) Copyright 2003-2007 Hewlett-Packard Development Company, L.P. ****
******************************************************************************
---- DRIVER INFORMATION ------------------------------------------------------
Driver State........................ READY
---- CONTROLLER INFORMATION --------------------------------------------------
Controller Product Number........... P800
Controller Product Name............. HP PCIe SmartArray P800
82
Troubleshooting
