3.
To delete the logical drive, press
F8
.
A warning and confirmation screen appears:
4.
After you carefully review your selection, press
F3
to delete the logical drive.
A confirmation screen appears.
5.
To acknowledge that the configuration was saved and return to the ORCA Main Menu, press
Enter
.
Moving disks and arrays to different positions or controllers
You can move disks and arrays to different positions or controllers. The following movements are
supported for physical disks and arrays:
•
To a different ID position on the same controller.
•
To a Smart Array controller of the same type, on the same server or on a different server; for
example, from one P400 to another.
•
To a Smart Array controller of a different type, on the same server or on a different server;
for example, from a P400 to a P800.
IMPORTANT:
When you move an array, the disks must remain in the same order.
Prerequisites
Before moving a disk or array on a Smart Array Series Controller, be sure the following hardware
and software prerequisites are met:
Moving disks and arrays to different positions or controllers
55
