HP HP ProCurve Series 6600, Access Security Manual

Page: 700 / 778

14-10
Configuring and Monitoring Port Security
Port Security
Figure 14-4.Example of the Port Security Configuration Display for a Single Port
The next example shows the option for entering a range of ports, including a
series of non-contiguous ports. Note that no spaces are allowed in the port
number portion of the command string:
HP Switch(config)# show port-security A1-A3,A6,A8
Listing Authorized and Detected MAC Addresses.
Switch(config)# show port-security A3
Port Security
Port : A3
Learn Mode [Continuous] : Static Address Limit [1] : 1
Action [None] : None
Eavesdrop Prevention [Enabled] : Enabled
Authorized Addresses
--------------------
00906d-fdcc00
Syntax: show mac-address [ port-list | mac-address | vlan < vid >]
Without an optional parameter,
show mac-address
lists the
authorized MAC addresses that the switch detects on all ports.
mac-address:
Lists the specified MAC address with the port on
which it is detected as an authorized address.
port list:
Lists the authorized MAC addresses detected on the
specified port(s).
vlan < vid >:
Lists the authorized MAC addresses detected on
ports belonging to the specified VLAN.