manualshive.com logo in svg

HP HP ProCurve Series 6600, Access Security Manual

Share
Download
HP HP ProCurve Series 6600 Access Security Manual Download Page 650

13-38

Configuring Port-Based and User-Based Access Control (802.1X)

802.1X Open VLAN Mode

Open VLAN Mode with 

Only

 an 

Authorized-Client VLAN

 Configured:

• Port automatically blocks a client that cannot initiate an 

authentication session.

• If the client successfully completes an authentication session, the 

port becomes an untagged member of this VLAN. 

• If the port is statically configured as a tagged member of any other 

VLAN, the port returns to tagged membership in this VLAN upon 
successful client authentication. This happens even if the RADIUS 
server assigns the port to another, authorized VLAN. If the port is 
already configured as a tagged member of a VLAN that RADIUS 
assigns as an authorized VLAN, then the port becomes an 

untagged

 member of that VLAN for the duration of the client 

connection.

Note:

 An authorized-client VLAN configuration can be overridden 

by a RADIUS authentication that assigns a VLAN. (Refer to figure 
13-1 on page 13-10.)

802.1X Per-Port Configuration

Port Response

Summary of Contents for HP ProCurve Series 6600











































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands