manualshive.com logo in svg

HP HP ProCurve Series 6600, Access Security Manual

Share
Download
HP HP ProCurve Series 6600 Access Security Manual Download Page 571

11-21

Configuring Advanced Threat Protection

Dynamic ARP Protection

Configuring Additional Validation Checks on ARP 
Packets

Dynamic ARP protection can be configured to perform additional validation 
checks on ARP packets. By default, no additional checks are performed. To 
configure additional validation checks, enter the 

arp-protect validate

 command 

at the global configuration level.

You can configure one or more of the validation checks. The following 
example of the 

arp-protect validate

 command shows how to configure the 

validation checks for source MAC address and destination AMC address:

HP Switch

(config)# arp-protect validate src-mac dest-mac

Verifying the Configuration of Dynamic ARP Protection

To display the current configuration of dynamic ARP protection, including the 
additional validation checks and the trusted ports that are configured, enter 
the 

show arp-protect

 command:

Syntax:

[no] arp-protect validate <[src-mac] | [dest-mac] | [ip]> 

src-mac

(Optional) Drops any ARP request or response 
packet in which the source MAC address in the 
Ethernet header does not match the sender MAC 
address in the body of the ARP packet.

dest-mac

(Optional) Drops any unicast ARP response packet 
in which the destination MAC address in the 
Ethernet header does not mach the target MAC 
address in the body of the ARP packet.

ip

(Optional) Drops any ARP packet in which the 
sender IP address is invalid. Drops any ARP 
response packet in which the target IP address is 
invalid. Invalid IP addresses include: 0.0.0.0, 
255.255.255.255, all IP multicast addresses, and 
all Class E IP addresses.

Summary of Contents for HP ProCurve Series 6600











































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands