manualshive.com logo in svg

HP HP ProCurve Series 6600, Access Security Manual

Share
Download
HP HP ProCurve Series 6600 Access Security Manual Download Page 281

6-47

RADIUS Authentication, Authorization, and Accounting

VLAN Assignment in an Authentication Session

VLAN Assignment in an Authentication 
Session

A switch supports concurrent 802.1X and either Web- or MAC-authentication 
sessions on a port (with up to 32 clients allowed). If you have configured 
RADIUS as the primary authentication method for a type of access, when a 
client authenticates on a port, the RADIUS server assigns an untagged VLAN 
that is statically configured on the switch for use in the authentication session. 
(For information on how to configure a user profile on a RADIUS server with 
the VLAN to be assigned for 802.1X, Web, or MAC authentication, refer to the 
documentation provided with the RADIUS server application.)

If a switch port is configured to accept multiple 802.1X and/or Web- or MAC-
Authentication client sessions, all authenticated clients must use the same 
port-based, untagged VLAN membership assigned for the earliest, currently 
active client session. On a port where one or more authenticated client 
sessions are already running, all clients are on the same untagged VLAN 
(unless MAC-based VLANs are enabled. Please see “MAC-Based VLANs” on 
page 6-51). If the RADIUS server subsequently authenticates a new client, but 
attempts to re-assign the port to a different, untagged VLAN than the one 
already in use for the previously existing, authenticated client sessions, the 
connection for the new client will fail.

Tagged and Untagged VLAN Attributes

When you configure a user profile on a RADIUS server to assign a VLAN to an 
authenticated client, you can use either the VLAN’s name or VLAN ID (VID) 
number. For example, if a VLAN configured in the switch has a VID of 100 and 
is named 

vlan100

, you could configure the RADIUS server to use either “100” 

or “vlan100” to specify the VLAN. 

After the RADIUS server validates a client’s username and password, the 
RADIUS server returns an Access-Accept packet that contains the VLAN 
assignment and the following attributes for use in the authentication session:

■

Egress-VLANID: Configures an optional, egress VLAN ID for either 
tagged or untagged packets (RFC 4675).

■

Egress-VLAN-Name: Configures an optional, egress VLAN for either 
tagged or untagged packets when the VLAN ID is not known (RFC 
4675).

Summary of Contents for HP ProCurve Series 6600











































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands