manualshive.com logo in svg

HP HP DL360 G7, Maintenance And Service Manual, Page: 64 / 87

Share
Download
HP HP DL360 G7 Maintenance And Service Manual Download Page 64

 

Diagnostic tools  64 

ASR increases server availability by restarting the server within a specified time after a system hang or 
shutdown. At the same time, the HP SIM console notifies you by sending a message to a designated 

pager number that ASR has restarted the system. You can disable ASR from the HP SIM console or 
through RBSU. 

 

HP Insight Remote Support software 

HP strongly recommends that you install HP Insight Remote Support software to complete the installation or 

upgrade of your product and to enable enhanced delivery of your HP Warranty, HP Care Pack Service, 
or HP contractual support agreement. HP Insight Remote Support supplements your monitoring, 24 x 7 to 
ensure maximum system availability by providing intelligent event diagnosis, and automatic, secure 

submission of hardware event notifications to HP, which will initiate a fast and accurate resolution, based 
on your product’s service level. Notifications may be sent to your authorized HP Channel Partner for on-

site service, if configured and available in your country.  The software is available in two variants: 

•

 

HP Insight Remote Support Standard: This software supports server and storage devices and is 

optimized for environments with 1–50 servers. Ideal for customers who can benefit from proactive 
notification, but do not need proactive service delivery and integration with a management platform. 

•

 

HP Insight Remote Support Advanced: This software provides comprehensive remote monitoring and 

proactive service support for nearly all HP servers, storage, network, and SAN environments, plus 
selected non-HP servers that have a support obligation with HP. It is integrated with HP Systems 

Insight Manager. A dedicated server is recommended to host both HP Systems Insight Manager and 
HP Insight Remote Support Advanced. 

Details for both versions are available on the HP website To download the software, go to Software Depot Select 

Insight Remote Support

 from the menu on the right. 

Summary of Contents for HP DL360 G7
























































































Reviews:

No comments