Removal and replacement procedures 30
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
Remove the component as indicated.
To replace the component, slide the component into the bay until it clicks.
SAS and SATA hard drive
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
To remove the component:
1.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations.
2.
Back up all server data on the hard drive.
3.
Remove the hard drive.
To replace the component, reverse the removal procedure.
Summary of Contents for HP DL360 G7
