manualshive.com logo in svg

HP HP DL360 G7, Maintenance And Service Manual, Page: 27 / 87

Share
Download
HP HP DL360 G7 Maintenance And Service Manual Download Page 27

 

Removal and replacement procedures  27 

•

 

Avoid hand contact by transporting and storing products in static-safe containers. 

•

 

Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations. 

•

 

Place parts on a grounded surface before removing them from their containers. 

•

 

Avoid touching pins, leads, or circuitry. 

•

 

Always be properly grounded when touching a static-sensitive component or assembly. 

 

Symbols on equipment 

The following symbols may be placed on equipment to indicate the presence of potentially hazardous 
conditions. 

  

 

 

This symbol indicates the presence of hazardous energy circuits or electric shock 
hazards. Refer all servicing to qualified personnel. 

WARNING:

  To reduce the risk of injury from electric shock hazards, do not open this 

enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel. 

  

  

 

 

This symbol indicates the presence of electric shock hazards. The area contains no 
user or field serviceable parts. Do not open for any reason. 

WARNING: 

 To reduce the risk of injury from electric shock hazards, do not open this 

enclosure. 

  

  

 

 

This symbol on an RJ-45 receptacle indicates a network interface connection. 

WARNING:

  To reduce the risk of electric shock, fire, or damage to the equipment, 

do not plug telephone or telecommunications connectors into this receptacle. 

  

  

 

 

This symbol indicates the presence of a hot surface or hot component. If this surface 
is contacted, the potential for injury exists. 

WARNING:

  To reduce the risk of injury from a hot component, allow the surface to 

cool before touching. 

  

  

 

 

14.06 - 15.97 

kg 

31.00 - 35.20 

lb 

This symbol indicates that the component exceeds the recommended weight for one 
individual to handle safely. 

WARNING:

  To reduce the risk of personal injury or damage to the equipment, 

observe local occupational health and safety requirements and guidelines for 

manual material handling. 

  

  

 

These symbols, on power supplies or systems, indicate that the equipment is 

supplied by multiple sources of power. 

WARNING: 

 To reduce the risk of injury from electric shock, remove all power 

cords to completely disconnect power from the system. 

  

 

Server warnings and cautions 

Before installing a server, be sure that you understand the following warnings and cautions. 

  

Summary of Contents for HP DL360 G7
























































































Reviews:

No comments