a.
Remove the two display bezel screw covers (1).
The display bezel screw covers are included in the Rubber Kit, spare part number 901282-001 for
the HP Chromebook 11 G5 non-touch screen models and 900802-001 for the HP Chromebook
models.
b.
Remove the two Phillips screws (2) that secure the display bezel to the display assembly.
c.
Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
d.
Remove the display bezel (4).
The display bezel is available using spare part number 902764-001 for the HP Chromebook 11 G5
models and 900799-001 for the HP Chromebook models.
NOTE:
The camera/microphone module can be removed at any time during the display assembly
removal process.
4.
If it is necessary to replace the camera/microphone module:
38
Chapter 5 Removal and replacement procedures
