HP HP 242 G2, Maintenance And Service Manual, Page: 78 / 125

Speakers
Description Spare part number
Speakers (include left and right speakers and cables) 718443-001
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 33 ) and then remove the following components:
a. Hard drive (see Hard drive on page 34 )
b. WLAN module (see WLAN module on page 37 )
c. Solid-state drive (see mSATA drive on page 39 )
d. Memory module service cover (see Memory module on page 40 )
e. Optical drive (see Optical drive on page 42 )
f. Keyboard (see Keyboard on page 46 )
g. Top cover (see Top cover on page 49 )
h. Fan (see Fan on page 56 )
i. System board (see System board on page 59 )
Remove the speakers:
1. Release the front speaker cables (1) from the clips built into the base enclosure.
2. Remove the speakers (2) .
68 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts