background image

Keyboard

Description

Spare part number

For use in Adriatics

605922-BA1

For use in Belgium

605922-A41

For use in the Czech Republic

605922-221

For use in France

605922-051

For use in Germany

605922-041

For use in Greece

605922-DJ1

For use in Hungary

605922-211

For International use

605922-B31

For use in Israel

605922-BB1

For use in Italy

605922-061

For use in North America

605922-001

For use in Norway

605922-DH1

For use in Portugal

605922-131

For use in Russia

605922-251

For use in Saudi Arabia

605922-171

For use in Spain

605922-071

For use in Switzerland

605922-BG1

For use in Turkey

595199-141

For use in the United Kingdom

595199-031

Before removing the keyboard:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 41

).

5.

Remove the hard drive (see 

Hard drive on page 42

).

6.

Remove the WLAN/Memory Module compartment cover (see 

WLAN module on page 47

).

Remove the keyboard:

1.

Turn the computer upside down with the front toward you.

Component replacement procedures

53

Summary of Contents for G62 Series








































































































































Reviews: