HP G62 Series, Maintenance And Service Manual

Page: 116 / 135

Linux backup and recovery
Use the instructions in this section if SUSE Linux SLED 11 is installed on the computer.
To protect your information, back up your files and folders. Then if the system fails, restore your
important files from copies. Use the options listed in this section to restore the operating system and
programs that were installed at the factory.
CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files
created and any software installed on the computer are permanently removed. The f11 recovery tool
reinstalls the original operating system and HP programs and drivers that were installed at the
factory. Software, drivers, and updates not installed by HP must be manually reinstalled. Personal
files must be restored from a backup.
To recover the original hard drive image using f11 :
1. If possible, back up all personal files.
2. Restart the computer, and then press f11 while the “Press <F11> for recovery” message
appears on the screen.
3. Follow the on-screen instructions.
NOTE: If you are unable to boot (start up) the computer from the primary operating system or from
the recovery f11 method, purchase a SUSE Linux Enterprise Desktop Operating System DVD to
repair the operating system. For additional information, see the Worldwide Telephone Numbers
booklet, included with the computer.
106 Chapter 7 Backup and recovery